The Hygienic uPVC range is quick and easy to install when using our wide range of accessories.

2-Part Adhesive

This adhesive is in 2 parts and once mixed together its creates a paste consistency with gap filling capabilities. When cured the adhesive forms a long lasting resilient and tough bond which is resistant to solvents, water and heat. Use one 6.5 ltr tub of 2 part adhesive per sheet.  

Water based adhesive can also be also be provided upon request.


This high quality sealant/adhesive provides excellent adhesion to many surfaces, remaining permanently elastic after curing. Aluminium sausages, for use with a bonding gun, contains 600ml - two of these will be enough to bond a standard sheet. 

Adhesive Economy Grade

A general purpose, strong adhesive with good gap filling properties, creating excellent bond strength without having to use of other methods of fixing. 

Fixing & Cutting

Sheets can be fixed to most dry substrates depending on the surface suitability. To complete a fully hygienic installation it is advised to use the adhesives and profiles in our range. uPVC products can be easily cut, using a jigsaw with a fine toothed blade would be the most suitable way but if you are using a circular saw then please use a fine TCT blade.

Chemical Resistance

Our uPVC products are resistant to practically all frequently used chemicals. If you require any further information please get in touch.

Fire Resistance & Food Safety Compliant

uPVC is a fire retardant self extinguishing material. Our uPVC cladding materials are tested to meet the BS 476 part 6 and Class 1 at BS 476 part 7. All our uPVC cladding materials comply with all the current regulations intended for food contact. If you require any further information or for current compliance certifications please do not hesitate to get in touch.

Cleaning, Storage & Conditioning

All uPVC Cladding can usually be cleaned by wiping the materials with a diluted mild detergent using a soft cloth. Do not use any substance with temperatures exceeding 60°C. Using abrasive cleaners, wire wool or pads will damage the surface of the material so should be avoided. All uPVC sheets must be completely supported and kept on a level surface. It is advised that uPVC cladding should be at room temperature (min 14°C) before installation. This can be achieved by leaving the materials for a minimum of 24 hours.  

CodeProductSize Unit Price (Net) Inc. VAT Qty
U-PVC ADH ECOAdhesive Economy Grade Cartridge380ml£12.91£15.49
U-PVC ADH & SEALAdhesive & Sealant Aluminium Sausage600ml£13.34£16.01
U-PVC ADH 2PT2 Part Adhesive6.5 Ltr£39.74£47.69
U-PVC ADH & SEALAdhesive & Sealant Cartridge310ml £8.37£10.04